1. <th id="bvsc7"></th>
    2. <tbody id="bvsc7"><pre id="bvsc7"></pre></tbody>
      

            1. <button id="bvsc7"><object id="bvsc7"><menuitem id="bvsc7"></menuitem></object></button>

                  Sat, Oct 16, 2021 23:33:32 GMT

                  Castingparts

                  Casting Parts



                  Aluminum Foundry

                  When "sand casting" the second half of the first type

                  on the plate,put sand box filled sand compaction Calibrating

                  made under type finish, made a good sand will be rotated

                  180 degrees, put a halfsize, sprinkle parting agent,

                  put the sand box, fill and compaction of sand, Calibrating

                  the sand box will be rotated 180 degrees,respectively,

                  to remove the upper and lower mold halves,

                  then flipped 180 degrees on the type and the lower Hao,

                  sand making finished, waiting for pouring.

                  This process, commonly known - "foundry."





                  Carbon Steel Casting Gear Parts

                  1.according to use can be divided into the carbon steel,

                  carbon structural steel ,carbon tool steel and free cutting

                  steel three, steel structure is divided into engineering

                  construction steel and machinery manufacturing steel two;

                  2.by refining methods can be divided into open hearth steel,

                   converter steel;

                  3.according to the deoxidation methods can be divided

                  into boiling steel (F), steel (Z),semi killed steel (b) and

                  special steel (TZ);

                  4.according to the carbon content of the steel can be

                  divided into low carbon steel(WC ≤ 0.25%), carbon

                  steel (WC0.25% - 0.6%) and high carbon steel (WC>0.6%)

                  5.according to the quality of the steel can be divided into

                  ordinary carbon steel(carbon steel containing phosphorus,

                  sulfur, carbon steel (high quality),

                  low phosphorus sulfur) and high-grade steel

                  (phosphorus, sulfur less) and super high quality steel. Description:

                  the higher the hardness greater carbon content of

                  general carbon steel,strength is high, but low plasticity.


                  SUS Casting Parts

                  Sandblasting is powered by compressed air,

                  to form a high-speed jet beam will spray

                  material (copper sand, quartz sand, silicon carbide, iron ore, sand)

                  high-speed jet to the surface to be treated,

                  so that the surface appearance or shape changes.

                  Due to impact and abrasive cutting action on the work

                  piece surface, the surface of the work piece

                  to obtain a roughness of different cleanliness,

                  the mechanical properties of the surface is improved,

                  thereby improving the fatigue resistance of the work piece,

                  and the coating increases its adhesion between the coating

                  extends the durability,

                  but also conducive to peace and decorative paint flow.





                  Foundry Casting

                  Foundry casting sand with clay bonded molding

                  materials for the production of castings, is the

                  historic process method is the most widely used

                  process method. Speaking of a long history,

                  dating back thousands of years ago; On its scope

                  of application, you can say that no one around

                  the world do not have.




                  Cast Iron Frame

                  Cast iron is easy to cast shape complex parts;

                  cheaper; internal friction of cast iron, and have a

                  good vibration resistance. The disadvantage

                  is the long production cycle, higher unit production

                  costs; casting easy to produce waste, quality is

                  difficult to control; casting allowance big,

                  big machining costs. Common gray cast iron,

                  there are two: HT200 suitable shape is simple,

                  the unit pressure greater (p> 5 kg / cm 2) of the rail,

                  a large bending stress or (σ ≥ 300 kg / cm 2) and

                  other bed ; HT150's liquidity is good,

                  but somewhat less mechanical properties

                  suitable for complex shapes and load small base.

                  If the wear resistance of gray cast iron can not meet the

                  requirements, should be cast iron.








                  Product you may interested

                  • 1
                  • 2
                  • 3
                  • 4

                  CNC Machining Parts

                  Derf team work closely with our clients to ensure the product is designed efficiently and all products are up to top standards for the required application. As a CNC machining manufacturer..

                  Read more

                  Forging components

                  We make spare parts for cars, motorcycles, e-bike, electronic devices, sporting equipment, watercraft, aircraft,medical devices, DAT device, optical devices, clocks,machinery, engines, furniture and more.

                  Read more

                  Casting parts

                  We are focus on different material , different processing casting parts , you can find what you want in here ! We have many years experience in this filed, exporting to many Countries ,used in wide range

                  Read more

                  cnc turned parts

                  We have professional technical team to response any requirement from clients , Short delivery time by express or shipping . Also , will offer some effective suggestion in order to reduce cost .

                  Read more

                  About us

                  Derf is precision cnc machining parts making factory located in wuxi ,China, We have been supplying high quality cnc machining parts for wide range of Industries.Since 2003, Derf has established itself as a leader in the custom high-precision cnc machining parts Read More>>

                  Contact Us

                  Shanghai Derf Manufacturing Co.,LTD.
                  Address:Industrial Park, Tan Village, An Town, Xishan District, Wuxi City, Jiangsu Province, China
                  Tel: +86-0510-88717062
                  Fax: +86-0510-88717062
                  info@derf-cnc.com

                  免费三级片_免费三级片免费三级片_超碰97免费人妻_天天撸

                  1. <th id="bvsc7"></th>
                  2. <tbody id="bvsc7"><pre id="bvsc7"></pre></tbody>
                    

                          1. <button id="bvsc7"><object id="bvsc7"><menuitem id="bvsc7"></menuitem></object></button>

                                童养媳小说| 千寻小说| 阳炎project小说| 曹若冰武侠小说全集| 变态小说| 日本小说| 男儿本色小说 无限小说网txt下载 杀破狼小说 架空历史军事小说 轻小说文库 夏七夕小说 免费小说网站大全 嫁入豪门小说 写轮眼小说 乱抡小说 极限小说 强烈推荐的经典小说 红岩小说 小说月报 宫斗小说推荐 九把刀小说 upu小说 异界重生小说 裘梦小说 如果可以这样爱小说 小说网免费阅读 成人言情小说 好看的古代小说 无限小说 小说永生 阴阳师小说 天下第二小说 好看的bl小说推荐 水浒小说 古典小说网 官道小说 猎场小说 第二次握手小说 狂蟒之灾小说 全本小说排行